1000128900 2015-09-22T17:40:37-04:00 1000218903 false Navigator Tech Bulletins 1 2015-09-22T17:40:37-04:00 1 1 2016-10-31T10:08:14-04:00 0 0 How to configure a Windows 10 computer for a Navigator installation <div dir="ltr"> <p>How to configure a Windows 10 computer for a Navigator installation</p> </div> 1000218903 152 1000240638 2016-10-31T10:08:14-04:00 1003593276 1 2 0 0 Navigator computer configuration (Windows 10) 2016-10-31T10:09:36-04:00 1003593276 1 2017-01-12T16:03:08-05:00 0 0 This document explains how to transfer both the icc profile and the calibration out of a system into another one.  The Setgold calibration normally produces a CMYK curve that calibrates and grey balances the output. It’s usually used in combination with an ICC profile that characterizes the press. You’ll want to capture both. See this document for details. <p>This document explains how to transfer both the icc profile and the calibration out of a system into another one. </p><p><br></p><p>The Setgold calibration normally produces a CMYK curve that calibrates and grey balances the output. It’s usually used in combination with an ICC profile that characterizes the press. You’ll want to capture both.</p><p><br></p><p>See this document for details.</p><p><br></p> 1000218903 13 1000243786 2017-01-12T16:03:08-05:00 1003593276 2 2 0 0 Copying ICC profiles and SetGold profiles from RIP to RIP 2017-01-12T16:03:31-05:00 1003593276 1 2016-09-15T14:27:02-04:00 0 1 The first shipping version of the Navigator 11 installation DVD contains a non-functioning dll inside several of the output plugins. You can recognize this disk by the date printed on it.  July 2016. You can recognize the error by comparing your results to this: Should you encounter this PB2 error with a USB interface and version 11, try again with a plugin installer from here. The problem has been fixed with new plugin installers that include a new DLL.   (Also.  As of January 31, 2017, a new disk has been released which fixes this problem.  This fixed disk is dated January 2017 and has the part number 900-0700-011. ) <div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"> <p>The first shipping version of the Navigator 11 installation DVD contains a non-functioning dll inside several of the output plugins.</p> <p>You can recognize this disk by the date printed on it.  July 2016.</p> <p><br></p> <p>You can recognize the error by comparing your results to this:</p> <p><img src="https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/1045095615/original/XDLL%20ERROR.JPG?1473975911" class="inline-image fr-dii fr-draggable" data-id="1045095615"></p> <br><p><br></p> <p><span style="font-size: medium;">Should you encounter this PB2 error with a USB interface and version 11, try again with a plugin installer from <a href="http://help.xitron.com/solution/articles/1000238727-current-output-device-drivers-rip-plug-ins-" target="_blank">here</a>.</span></p> <p><span style="font-size: medium;">The problem has been fixed with new plugin installers that include a new DLL.  </span></p> <p><br></p> <p><span style="font-size: medium;">(Also.  As of January 31, 2017, a new disk has been released which fixes this problem.  This fixed disk is dated January 2017 and has the part number 900-0700-011. )</span></p> <p><br></p> <p><br></p> </div></div></div></div></div></div> 1000218903 178 1000238547 2017-01-31T15:52:45-05:00 1003593276 3 2 0 1 v11 disk has some broken output plugins. The fix is here. 2017-01-31T15:57:42-05:00 1003593276 1 2015-11-02T14:27:37-05:00 0 3 Starting with version 10.1 Xitron Navigator RIPs may be licensed with either the LDK system or with Harlequin License Server (HLS). HLS requires a USB hardware key or 'dongle' and may include codes as well.   LDK licenses the RIP with a code only.  No hardware is required.  The LDK license code is called a "Product Key". The above statements currently apply only to the RIP, and not to Navigator Server. Navigator 10.1r2 ships with HLS as the default licensing mode.   However, Navigator 10.1r2 may be licensed with either method. If you order a disk, or download an installer, you will end up with a RIP that is looking for a dongle.  If you order a RIP preconfigured on a computer, it will be licensed appropriately for you. New installations: There are three possible 'new installation' licensing situations. You are installing a new RIP and you have a dongle, with an accompanying code sheet.   You have the appropriate licensing mode. Just run the installer.  You are installing a new RIP and you have an LDK Product Key. Warning.  In this case you have the incorrect licensing mode until you follow these steps:. After the installation is complete, but before you attempt to run the RIP, run the utility "Convert_to_LDK" (attached to this article).   Before you attempt to run the RIP, enter the Product Key into the LDK License Tool, located under the Start Menu at Start/Navigator. You order a RIP pre-configured on a computer from Xitron.  In this case, regardless of licensing method, we will set it up correctly for you.  Upgrades: You have a USB dongle.  The RIP is expecting this.  You can perform an upgrade in the normal way. Switching the license mode: If you need to switch from one license method to the other, download the attached zip files. "Convert_to_HLS" will convert a RIP from LDK licensing to HLS.  "Convert_to_LDK" will convert a RIP from HLS licensing to LDK. <p></p> <p><span>Starting with version 10.1 Xitron Navigator RIPs may be licensed with either the LDK system or with Harlequin License Server (HLS).</span><br></p> <p><br></p> <p>HLS requires a USB hardware key or 'dongle' and may include codes as well.  </p> <p>LDK licenses the RIP with a code only.  No hardware is required.  The LDK license code is called a "Product Key".</p> <p>The above statements currently apply only to the RIP, and not to Navigator Server.</p> <p><br></p> <p>Navigator 10.1r2 ships with HLS as the default licensing mode.  </p> <p>However, Navigator 10.1r2 may be licensed with either method.</p> <p>If you order a disk, or download an installer, you will end up with a RIP that is looking for a dongle.  If you order a RIP preconfigured on a computer, it will be licensed appropriately for you.</p> <p><br></p> <p><b>New installations:</b></p> <p><b>There are three possible 'new installation' licensing situations.</b></p> <p></p> <ol> <li> <span><i>You are installing a new RIP and you have a dongle, with an accompanying code sheet. </i> </span><span> You have the appropriate licensing mode. </span><span>Just run the installer. </span><br> </li> <li> <i>You are installing a new RIP and you have an LDK Product Key</i><span>. Warning.  In this case you have the incorrect licensing mode until you follow these steps:.</span><br> </li> </ol> <ul> <li>After the installation is complete, but before you attempt to run the RIP, run the utility "Convert_to_LDK" (attached to this article).  </li> <li><span>Before you attempt to run the RIP, enter the Product Key into the LDK License Tool, located under the Start Menu at Start/Navigator.</span></li> </ul> <li> <i>You order a RIP pre-configured on a computer from Xitron</i><span>.  In this case, regardless of licensing method, we will set it up correctly for you. </span><br> </li> <p><span><br></span></p> <p><b>Upgrades:</b></p> <p>You have a USB dongle.  The RIP is expecting this.  You can perform an upgrade in the normal way.</p> <p><br></p> <p><b>Switching the license mode:</b></p> <p>If you need to switch from one license method to the other, download the attached zip files.</p> <p>"Convert_to_HLS" will convert a RIP from LDK licensing to HLS. </p> <p><span style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 13px; font-weight: normal;">"Convert_to_LDK" will convert a RIP from HLS licensing to LDK.</span></p> <p><br></p> 1000218903 414 1000212735 2015-11-02T15:03:52-05:00 1003593276 4 2 0 3 Version 10.1x Navigator RIP Licensing. LDK codes vs. HLS hardware keys 2017-01-31T16:00:38-05:00 1003593276 1 2016-09-15T13:54:08-04:00 0 1 Harlequin Screening documentation <div dir="ltr"> <p>Harlequin Screening documentation</p> </div> 1000218903 76 1000238533 2016-09-15T13:54:08-04:00 1003593276 5 2 0 1 Harlequin Screening Library 2017-01-31T16:00:38-05:00 1003593276 1 2015-11-17T15:14:47-05:00 0 2 There is a resolution limitation in the Page Set Up user interface of 8000 dpi but the RIP is capable of higher resolutions. In order to achieve resolutions between 8001 and 9900 DPI you must enable a page feature in the RIP. You can do that with any high resolution RIP dongle. For resolutions higher than 9900 you must get a special dongle from Xitron.   Download a copy of the page feature “Enable Higher Resolutions” .  It is attached to this article.  You may also assemble it yourself from Appendix A.   (This document uses a special version called “Enable 9600 DPI”.  This is simply renamed for clarity of purpose in the page setup. You may edit the actual resolution and the name of the file to reflect that resolution.)  Put this file into the “page features” folder at path <rip directory>/SW/page features.   Configure a page setup as shown. Check “Enable Feature” and choose the page feature you installed.   Choose a resolution outside the range presented by the dropdown menu for resolutions.  i.e. type it in manually.  Any resolution outside the presented range will do.  e.g. 50.  In this example I have manually typed the resolution of 8000.   Make sure that “Override resolution in job” is NOT checked. If you check that box then your desired resolution will be replaced with the resolution shown in the Page Setup’s resolution configuration.   You must create a custom separation and screening style as well.   Create a custom separation and screening style and name it after your desired DPI & LPI combination.  (In this example: “9600DPI / 200 LPI”) The reason we chose a resolution in the Page Setup user interface that is outside of the range of drop-down menu choices is that the RIP then consults the default for user-entered DPI ranges. In the absence of LPI information in the job the RIP always consults a resolution/frequency pair from this list. Click on “10.0-8000.0” and then, under “edit selected row” type in whatever LPI frequency you desire. Click again on “10.0-8000.0” and the RIP will take that setting. Click “Ok” and set your Page Setup to use this separation and screening style.     When you run a job through this Page Setup it should result in a 9600 DPI job (or whatever DPI you edit the page feature to provide). To check, click the ripped job in the Output Controller and click “info”. You should see something that looks like the picture below.              ____________________   Appendix A.  The text of the page feature.   %!PS- %%Title: Enable Higher Resolutions %%Creator: E Nelsen, Xitron   %% The user interface of the Page Setup Manager disallows resolutions higher than 8000 dots per inch. %% The RIP is capable of rendering files at a greater resolution however. This snippet of postscript allows it. %% The format for the resolution is e.g. [9600 9600] for a square resolution of 9600 dpi. %% Edit the section below to obtain your desired resolution.  Most dongles are limited to 9900 dpi.  %% Even higher resolutions are possible, but for these you must consult Xitron.     << /HWResolution [9600 9600] >> setpagedevice     %%EOF <p><span style="font-size: 11px; font-family: Arial, sans-serif;">There is a resolution limitation in the Page Set Up user interface of 8000 dpi but the RIP is capable of higher resolutions. In order to achieve resolutions between 8001 and 9900 DPI you must enable a page feature in the RIP. You can do that with any high resolution RIP dongle. For resolutions higher than 9900 you must get a special dongle from Xitron.</span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif;"> </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif;">Download a copy of the page feature “Enable Higher Resolutions” .  It is attached to this article.  You may also assemble it yourself from Appendix A.  </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif;"> (This document uses a special version called “Enable 9600 DPI”.  This is simply renamed for clarity of purpose in the page setup. You may edit the actual resolution and the name of the file to reflect that resolution.)  </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif;">Put this file into the “page features” folder at path &lt;rip directory&gt;/SW/page features.</span></p> <p><br></p> <p><b><span style="font-size: 11px; font-family: Perpetua, serif; color: rgb(0, 0, 0);"> </span></b></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">Configure a page setup as shown. Check “Enable Feature” and choose the page feature you installed.</span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"><p><img src="https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/1034475011/original/blob1447791041246.png?1447791041" class="inline-image" data-id="1034475011"></p> <br></span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">Choose a resolution outside the range presented by the dropdown menu for resolutions.  i.e. type it in manually.  Any resolution outside the presented range will do.  e.g. 50.  </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">In this example I have manually typed the resolution of 8000. </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">Make sure that “Override resolution in job” is NOT checked. If you check that box then your desired resolution will be replaced with the resolution shown in the Page Setup’s resolution configuration.</span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">You must create a custom separation and screening style as well.</span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">Create a custom separation and screening style and name it after your desired DPI &amp; LPI combination.  (In this example: “9600DPI / 200 LPI”)</span></p> <p><br></p> <p><img src="https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/1034474919/original/blob1447790948551.png?1447790948" class="inline-image" data-id="1034474919"></p> <span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">The reason we chose a resolution in the Page Setup user interface that is outside of the range of drop-down menu choices is that the RIP then consults the default for user-entered DPI ranges. In the absence of LPI information in the job the RIP always consults a resolution/frequency pair from this list.</span><p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">Click on “10.0-8000.0” and then, under “edit selected row” type in whatever LPI frequency you desire.</span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">Click again on “10.0-8000.0” and the RIP will take that setting. Click “Ok” and set your Page Setup to use this separation and screening style.</span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">When you run a job through this Page Setup it should result in a 9600 DPI job (or whatever DPI you edit the page feature to provide).</span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">To check, click the ripped job in the Output Controller and click “info”. You should see something that looks like the picture below.</span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> <p><img src="https://s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/1034474834/original/blob1447790860932.png?1447790861" class="inline-image" data-id="1034474834" data-height="226" style="width: 435px; height: 226px;"></p></span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> ____________________</span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"><u>Appendix A.  The text of the page feature.</u></span></p> <p><span style="font-size: 11px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">%!PS-</span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">%%Title: Enable Higher Resolutions</span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">%%Creator: E Nelsen, Xitron</span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">%% The user interface of the Page Setup Manager disallows resolutions higher than 8000 dots per inch.</span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">%% The RIP is capable of rendering files at a greater resolution however. This snippet of postscript allows it.</span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">%% The format for the resolution is e.g. [9600 9600] for a square resolution of 9600 dpi. </span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">%% Edit the section below to obtain your desired resolution.  Most dongles are limited to 9900 dpi.  </span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">%% Even higher resolutions are possible, but for these you must consult Xitron.</span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">&lt;&lt; /HWResolution [9600 9600] &gt;&gt; setpagedevice</span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);"> </span></p> <p><span style="font-size: 9px; font-family: Arial, sans-serif; color: rgb(0, 0, 0);">%%EOF</span></p> <p><br></p> 1000218903 73 1000216362 2015-11-17T15:14:47-05:00 1003593276 6 2 0 2 Enabling resolutions higher than 8000 DPI in Navigator RIP 2017-01-31T16:00:39-05:00 1003593276 1 2016-01-14T16:09:42-05:00 0 0 Instructions for transferring an LDK license from one computer to another.   Note:This procedure transfers the entire key. That is, the RIP license, any layered options and protected plugins. 1.Install the RIP onto the new machine. 2.On the new machine start the LDK tool and select Transfer License,  followed by Transfer to this computer. 3.Select Create. You are prompted to save a "<machine name>.recipient.c2v" file. Select Save. When the .c2v file is saved click OK. The dialog displays a Locate option. Leave this dialog open. 4.Copy the "<machine name>.recipient.c2v" file to the computer currently running the RIP.  i.e. the source computer. 5.On the source computer start the LDK tool and select Transfer License, followed by Transfer from this computer. One or more key IDs will be displayed in a dropdown list in the Key ID field. Select the key ID you wish to transfer, and click Transfer…. Browse to and select the "<machine name>.recipient.c2v" file. 6.When the transfer file is selected you are prompted to save an "<XXX>.h2h" file. Where XXX is the key ID. 7.Now move the <XXX>.h2h file to the new recipient machine. 8.On the recipient machine select Locate. You are prompted to select the "<XXX>.h2h" file. Select this file and click Select. A Key Transfer Successful message will appear. The RIP will now run on the new machine and will not run on the older machine.  <p><span style="font-size: 13px;"><u style="font-size: 13px;">Instructions for transferring an LDK license from one computer to another.</u></span></p> <p><span style="font-size: 13px;"> </span></p> <p><span style="font-size: 13px;">Note:This procedure transfers the entire key. That is, the RIP license, any layered options and protected plugins.</span></p> <p><br></p> <p>1.Install the RIP onto the new machine.</p> <p>2.On the new machine start the LDK tool and select <i style="font-size: 13px;">Transfer License</i>,  followed by <i style="font-size: 13px;">Transfer to this computer</i>.</p> <p>3.Select Create. You are prompted to save a "&lt;machine name&gt;.recipient.c2v" file. Select Save. When the .c2v file is saved click OK. The dialog displays a <i>Locate </i>option. Leave this dialog open.</p> <p>4.Copy the "&lt;machine name&gt;.recipient.c2v" file to the computer currently running the RIP.  i.e. the source computer.</p> <p>5.On the source computer start the LDK tool and select <i style="font-size: 13px;">Transfer License,</i> followed by <i style="font-size: 13px;">Transfer from this computer</i>. One or more key IDs will be displayed in a dropdown list in the Key ID field. Select the key ID you wish to transfer, and click <i style="font-size: 13px;">Transfer</i>…. Browse to and select the "&lt;machine name&gt;.recipient.c2v" file.</p> <p>6.When the transfer file is selected you are prompted to save an "&lt;XXX&gt;.h2h" file. Where XXX is the key ID.</p> <p>7.Now move the &lt;XXX&gt;.h2h file to the new recipient machine.</p> <p>8.On the recipient machine select Locate. You are prompted to select the "&lt;XXX&gt;.h2h" file. Select this file and click <i style="font-size: 13px;">Select</i>. A <i style="font-size: 13px;">Key Transfer Successful</i> message will appear.</p> <p><br></p> <p></p> <p>The RIP will now run on the new machine and will not run on the older machine. </p> 1000218903 126 1000223098 2016-01-14T16:09:41-05:00 1003593276 7 2 0 0 Transferring LDK Licenses 2017-01-31T16:00:39-05:00 1003593276 1 2016-09-15T13:52:52-04:00 0 0 Harlequin Precision Screening <div dir="ltr"> <div dir="ltr"> <p>Harlequin Precision Screening</p> </div> </div> 1000218903 24 1000238532 2016-09-15T14:20:24-04:00 1003593276 8 2 0 0 Getting the best out of HPS 2017-01-31T16:00:39-05:00 1003593276 1 2016-09-15T13:54:59-04:00 0 0 Morisawa fonts <div dir="ltr"> <p>Morisawa fonts</p> </div> 1000218903 2 1000238535 2016-09-15T13:54:59-04:00 1003593276 9 2 0 0 Morisawa font support 2017-01-31T16:00:39-05:00 1003593276 1 2016-09-15T13:58:07-04:00 0 0 Cross modulated screening <div dir="ltr"> <p>Cross modulated screening</p> </div> 1000218903 31 1000238537 2016-09-15T13:58:07-04:00 1003593276 10 2 0 0 HXM screening 2017-01-31T16:00:39-05:00 1003593276 1 2016-09-15T14:01:45-04:00 0 0 Advanced TIFF file naming techniques <div dir="ltr"> <p><a href="http://www.xitron.com/downloads/support/TechBull2014/Navigator/NTB_11_001-Navigator%20Advanced%20TIFF%20File%20Naming.pdf" target="_blank">Advanced TIFF file naming techniques</a><br></p> </div> 1000218903 18 1000238539 2016-09-15T14:01:45-04:00 1003593276 11 2 0 0 Advanced TIFF file naming 2017-01-31T16:00:39-05:00 1003593276 1 2016-09-15T14:10:20-04:00 0 0 Instructions for resolving incompatibility between Avast and the Harlequin License Server. For version 10 RIPs and previous. <div dir="ltr"> <p><a href="http://www.xitron.com/downloads/support/TechBull2014/Navigator/NTB_13_002-Harlequin%20Services%20only%20installation.pdf" target="_blank">Instructions for resolving incompatibility between Avast and the Harlequin License Server. For version 10 RIPs and previous.</a><br></p> </div> 1000218903 19 1000238541 2016-09-15T14:10:20-04:00 1003593276 12 2 0 0 Harlequin License Server incompatible with Avast (Version 10 RIPs and previous) 2017-01-31T16:00:39-05:00 1003593276 1 2016-09-15T14:12:29-04:00 0 0 Navigator computer configuration (Windows 7) Instructions for computer OS configuration prior to Navigator installation. <div dir="ltr"> <div dir="ltr"> <p><a href="http://www.xitron.com/downloads/support/TechBull2014/Navigator/NTB_14_001-Navigator%20&amp;%20Sierra%20Windows%207%20Config.pdf" target="_blank">Navigator computer configuration (Windows 7)</a><br></p> <p><br></p> <p>Instructions for computer OS configuration prior to Navigator installation.</p> </div> </div> 1000218903 37 1000238542 2016-09-15T14:21:12-04:00 1003593276 13 2 0 0 Navigator computer configuration (Windows 7) 2017-01-31T16:00:39-05:00 1003593276 1 2016-09-15T14:15:36-04:00 0 0 Avantra with multiple cassettes <div dir="ltr"> <p><a href="http://www.xitron.com/downloads/support/TechBull2014/Navigator/NTB_14_002-Avantra%20with%20Multiple%20Cassettes.pdf" target="_blank">Avantra with multiple cassettes</a><br></p> </div> 1000218903 2 1000238544 2016-09-15T14:15:36-04:00 1003593276 14 2 0 0 Agfa Avantra with multiple cassettes 2017-01-31T16:00:39-05:00 1003593276 1 2016-09-15T14:17:57-04:00 0 0 Notes on the use of the PDF Raster output plugin <div dir="ltr"> <p><a href="http://www.xitron.com/downloads/support/TechBull2014/Navigator/NTB_15_001_PDF_Raster_v2.pdf" target="_blank">Notes on the use of the PDF Raster output plugin</a><br></p> </div> 1000218903 29 1000238545 2016-09-15T14:17:57-04:00 1003593276 15 2 0 0 PDF Raster output plugin 2017-01-31T16:00:39-05:00 1003593276