InpO2 Installation and licensing
MINIMUM REQUIREMENTS
Windows
Software Requirements
Adobe® Acrobat® Standard DC or Professional DC (Pro recommended)
Both editions: With Services (Continuous Track) or Desktop (Classic Track, 2015 and 2017 Releases)*
Hardware and Systems Requirements
• 1.5 Ghz processor or higher
• Microsoft Windows Server 2008 R2 (64 bit), 2012 (64 bit), or 2012 R2 (64 bit); Windows 7 (32 bit and 64 bit), Windows 8, 8.1 (32 bit and 64 bit), or Windows 10 (32 bit and 64 bit)
• 1GB of RAM
• 4.5 GB of available hard-disk space
• 1,024 x 768 screen resolution (1,280 x 1,024 recommended)
• Web browser
• DVD-ROM drive, if installing from a DVD
• USB Port for hardware key
* The previous Acrobat versions 9, 10 et 11 can still be used with inpO2 v5.
Macintosh
Software Requirements
Adobe® Acrobat® Professional DC Both editions: With Services (Continuous Track) or Desktop (Classic Track, 2015 and 2017 Releases)*
Hardware and Systems Requirements
• Intel® processor
• Mac OS X 10.10, 10.11 or 10.12
• 1 GB of RAM
• 2.75 GB of available hard-disk space
• 1,024 x 768 screen resolution (1,280 x 1,024 recommended)
• Web browser
• DVD-ROM drive, if installing from a DVD
• USB Port for hardware key * The previous Acrobat versions 9, 10 et 11 can still be used with inpO2 v5.
INSTALLATION
For Windows
Before starting the installation, ensure that your USB dongle is NOT connected to your computer.
Step 1: Double-click the "Setup.exe" installation file.
http://dynagram.com/support/default.asp?sec=downloads&cat=upgrades&solution=inpo2&system=windows
Step 2: Follow the instructions of the Installer.
Step 3: At the end of the inpO2 installation, the HASP driver installer will be launched. This installation is required for the proper functioning of the USB hardware key (dongle). Make sure the dongle is not connected before the process is completed.
Once the process is completed, inpO2 will be found in Acrobat's plug-ins folder. You can find all inpO2 documentation in the Dynagram subfolder.
Step 4: The next step is to activate your license.
For Mac
Before starting the installation, ensure that your USB dongle is NOT connected to your computer.
Step 1: Double-click the "Install inpO2" installation file.
http://dynagram.com/support/default.asp?sec=downloads&cat=upgrades&solution=inpo2&system=macintosh
Step 2: Follow the instructions of the Installer.
Step 3: If you have more than one instance of Adobe Acrobat on your computer, select the one for which you want to install inpO2 plug in.
Step 4: At the end of the inpO2 installation, the HASP driver installer will be launched. This installation is required for the proper functioning of the USB hardware key (dongle). Make sure the dongle is not connected before the process is completed.
Once the process is completed, inpO2 will be found in the plug-ins folder that you have selected.
Step 5: The next step is to activate your license.
LICENSE ACTIVATION
For Windows and Mac
IMPORTANT: In order to activate your inpO2 license, you need to send your USB dongle information to Dynagram.
NOTE: inpO2 is a dongle-protected application. The inpO2 dongle is cross-platform, hence it can be connected to a PC or a Macintosh computer. The USB dongle needs to be connected to your computer and its red light must be on, meaning it is active and installed properly. If the inpO2 dongle is not connected to a USB port on your computer when you start Adobe Acrobat, the plug-in will simply not load and the inpO2 menu will not appear in Acrobat's menu bar.
To see your license and dongle status, choose About inpO2 from inpO2's menu.
Step 1: Connect the dongle to a USB port of your computer.
Step 2: Launch Acrobat.
Step 3: In Acrobat, choose License > Create License Request from the inpO2's menu.
Step 4: Browse and save the c2v (customer to vendor) file on your computer. Then, fill out the registration form at: http://dynagram.com/WebSite/register.asp. You will be prompted to upload your c2v file at the end of the registration form. If you purchased your inpO2 product from a third party, please send your activation request and c2v file directly to your distributor.
Step 5: Upon receipt of your activation request, Dynagram will send you back a v2c (vendor to customer) file that you need to load into inpO2 dongle to activate the license:
Step 6: Ensure that your dongle is still connected and choose License... > Install License… from inpO2's menu.
Step 7: Browse to the v2c file on your computer and click Open.
Step 8: Relaunch Acrobat to activate inpO2 plug-in.
You do not need to repeat these steps unless you want to upgrade your license.