Reference and Support Documentation

Reference Manuals - Licensing
The Navigator Digital Front End is based on The Navigator Server and the Harlequin Host Renderer.    Current release:      Navigator Server version 8.0.  ...
Wed, 16 Dec, 2020 at 5:07 PM
Reference Manuals - Color Management
There are 2 levels at which color management is considered for the DFE.   The basic level is the end user level.  These concepts are covered in the User Gu...
Wed, 18 Dec, 2019 at 5:38 PM
Installing and using ICC Profiles and Calibrations on a DFE system
This article explains how to install and configure an ICC profile on a Navigator DFE system. This document is intended as a reference for technicians and ad...
Mon, 30 Mar, 2020 at 3:12 PM
Navigator DFE Supported Devices
The Navigator DFE with browser UI is a new product, based on the Harlequin Host Renderer, which supports these devices: Memjet Duraflex HP FI-1000 Memjet...
Thu, 28 May, 2020 at 10:20 AM
Duraflex development options
Navigator DFE is capable of driving a Duraflex based printer entirely from PDF input; to color management, screening, and rendering;  to engine control and ...
Thu, 23 Jul, 2020 at 11:48 AM
DFE for HP System Requirements
To run the DFE for HP product, you will need a system meeting or exceeding the following specifications. Windows PC running Windows 10 Pro, w/ full adm...
Thu, 8 Oct, 2020 at 10:43 AM
Updating Navigator Licensing Components (LDK)
Available here
Thu, 18 Feb, 2021 at 3:50 PM
Start and stop a paper path via USB relay switch
Introduction Xitron supports a 4 channel USB relay card for the purpose of switching things on and off.  It was envisioned to enable printer manufacturers ...
Fri, 14 May, 2021 at 10:54 AM
Paper sizes, bleeds, positioning on a sheet fed printer
This document is primarily for Duraflex users on a sheet fed system. The Duraflex system requires a TOF (Top of Form) offset.  It is set in the hwparams...
Wed, 26 May, 2021 at 5:56 PM
connecting the RIP system to a Duraflex print engine
There are two network connections.  A 10GB and a 1GB.  Connect both of those.  You can use mDNS (which is what Memjet recommends) or you could use IP addres...
Wed, 2 Jun, 2021 at 1:09 PM