User Guides
New Web Client for DFE
There are 4 ways to manage color in the Navigator DFE. Calibration ICC color transformation Spot (pantone) Color Adjustment tool Global Color Adjustmen...
Wed, 2 Jun, 2021 at 10:43 AM
When you get error messages or other feedback from your printer either in the DFE or at the printer itself, you can visit the device screen in the DFE to...
Wed, 26 May, 2021 at 4:58 PM
Navigator DFE can import a properly generated CGAT file third-party software programs like the Ideaalliance Curve tool. This is useful if you prefer...
Thu, 20 Aug, 2020 at 11:29 AM
Some sheetfed printers require you move the start of print in order to get bleed jobs to work. Such printers have a Top of Form signal (sometimes known as ...
Tue, 22 Jun, 2021 at 5:34 PM
An additional tab has been added to manage tone curves. The specifics of the controls for this page are outlined below. Create Tone Curve button: It is...
Tue, 15 Feb, 2022 at 3:11 PM
Configuration for the DFE is performed behind the Settings button. There are 4 possible destinations in Settings; Printer Control, Configuratio...
Thu, 19 Dec, 2019 at 10:57 AM
Create RIP configurations The installer will install a basic RenderConfig with a simple color setup, for each of the supported resolutions. If others are n...
Mon, 7 Oct, 2024 at 1:51 PM
The purpose of this article is to explain how to create and use Manual Calibrations. To create a Manual Calibration, you must first activate Manual Calibra...
Thu, 9 Jan, 2025 at 1:45 PM
The purpose of this article is define the setting of the 10G Intel Ethernet Converged Network Adapter X540-T2 for use with Xitron products. If you are using...
Fri, 11 Oct, 2024 at 12:21 PM
Resolution, calibration, and other settings. When you submit a job to the DFE via dragging and dropping onto the PLUS symbol, or by clicking the PLUS s...
Tue, 10 Dec, 2024 at 3:35 PM